Stand: 18.10.2017
Woodruff key DIN 6888 Maßbild

Filter - 48 out of 48 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Article no. Width bWidth b ToleranceHeight hHeight h Tolerancefor shaft diameter d1¹ allocation 1 abovefor shaft diameter d1¹ allocation 1 up tofor shaft diameter d1¹ allocation 2 abovefor shaft diameter d1¹ allocation 2 up toDiameter d2Diameter d2 permiss. diff.Shaft groove width b² (firm seat P9, loose seat N9)Shaft groove depth t1³, row AShaft groove depth t1³, row BShaft groove depth t1 permiss. diff.Shaft groove diameter d2 +0,5Hub groove width b² *** (firm seat P9, loose seat J9)Hub groove depth t2³, row A*Hub groove depth t2³, row B**Hub groove depth t2³ permiss. diff. für AHub groove depth t2³ permiss. diff. für BBevelled/Rounded r1Bevelled/Rounded permiss. diff.Rounding of groove bottom r2Rounding of groove bottom permiss. diff.Length l Shop
r1 chamfering (all sides), bevelled or rounding of manufacturer's choice
r2 rounding of groove bottom for shaft and hub
1 For connection dimensions, in particular of shaft ends, the allocation of the woodruff key cross-sections to the shaft diameters must be maintained.
Allocation I applies wherever the woodruff keys are used like parallel keys, i.e. to transmit the entire torque.
Allocation II applies wherever the woodruff key is used only for fixing the position of the drive element and for transmitting the torque of other elements, e.g. cotter or taper.
2 The permissible differences for the groove widths apply only as a guideline. It is recommended to comply with ISA grade IT 8 instead of IT 9 for the widths of reamed grooves (i.e. P 8 instead of P 9. N 8 instead of N 9 and J 8 instead of J 9).
3 In the shop drawings, the dimensions t1 and (d1 - t1) plus t2 and (d1 + t2) can be entered adjacently to one another, however in many cases the dimensions t1 and (d1 + t2) are sufficient. It may be necessary here to take into account the permissible differences and machining allowances of shaft and hub bore.
* Use row A (high hub groove) for preference, conforms to DIN 6885 Sheet 1 (t2 with back clearance).
** Row B (low hub groove) for machine tools, conforms to DIN 6885 Sheet 2.
*** With allocation II of the woodruff keys to the shaft diameters the tolerance field D 10 can also be selected.
Woodruff keys DIN 6888 | 1x1,4 | bright | Steel

Details of the selected product

  • 10 34 0010 0014/001
  • 1x1,4
  • Steel
  • bright
  • steel St 60

Pricing

Please first choose whether you are a private or corporate customer

The selected article is unfortunately not available in the shop at the moment. However, we would be delighted to receive a request from you!
€0.00
€0.00

In stock

Private customer (with VAT)
Corporate customer (without VAT)
The elementary component of every machine construction
Shop

You are in the mbo shop. Please choose the article you require and activate an inquiry/order.

More about the shop
Contact

Do you have any questions or would you like to talk to us in person? We would be delighted to advise you in person!
Tel. +49 9345 6700

To the contact form