Stand: 18.10.2017
Rod end DIN 12240-4 / DIN 648 / mbo 51 sealing + female thread product image

Rod ends DIN ISO 12240-4 (DIN 648) high performance version with sealing (mbo standard 51) female thread

can be regreased, suitable for higher rotation speeds

Rod end DIN 12240-4 / DIN 648 / mbo 51 sealing + female thread Maßbild

Filter - 6 out of 6 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Thread version Lubrication Article no. dd ToleranceABB Toleranced1d2d3d4d5d7d8d9h1l3l4swStatic basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Masse (g) per StückCETOP Shop
Alternatively, there are also neoprene protective rubber caps for rod ends of size 6 to 35.
Rod ends DIN ISO 12240-4 (DIN 648) high performance version with sealing (mbo standard 51) female thread | 8 | galvanised | Steel

Details of the selected product

  • 10 51 6483 1008/013
  • 8
  • Steel
  • galvanised
  • via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
  • housing: up to size 12 undercut steel 1.0718 (11SMnPb30+C), lathe work, galvanised

    from size 14 thermal treatment steel 1.0402 (C22), forged, galvanised

    size 50 thermal treatment steel 1.0503 (C45), lathe work, galvanised

    bearing shell: special bronze CuSn8

    internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated

    sealing: NBR elastomer, temperature resistance -30 °C to +120 °C, resistant against mineral oils, greases and gasoline

    fitting rings: brass

    distance liner: stainless steel 1.4305 (X8CrNiS18-9)

Pricing

Please first choose whether you are a private or corporate customer

The selected article is unfortunately not available in the shop at the moment. However, we would be delighted to receive a request from you!
€0.00
€0.00

In stock

Private customer (with VAT)
Corporate customer (without VAT)

This might also interest you

Clevis DIN 71752 / DIN ISO 8140 / CETOP product image
Clevises DIN 71752 / DIN ISO 8140 / CETOP RP102P
Clevis joint similar to DIN 71751 with folding spring bolt product image
Clevis joints similar to DIN 71751, with folding spring bolt
Shop

You are in the mbo shop. Please choose the article you require and activate an inquiry/order.

More about the shop
Contact

Do you have any questions or would you like to talk to us in person? We would be delighted to advise you in person!
Tel. +49 9345 6700

To the contact form