Stand: 18.10.2017
Rod end DIN 12240-4 / DIN 648 / mbo 53 higher basic load rating + threaded bolt + male thread product image

Rod ends DIN ISO 12240-4 (DIN 648) high performance version for higher basic load ratings with threaded bolt (mbo standard 53) male thread

can be regreased, suitable for high pressure loads and tensile forces

Rod end DIN 12240-4 / DIN 648 / mbo 53 higher basic load rating + threaded bolt + male thread Maßbild

Filter - 7 out of 7 products selected

Additional columns

Choose columns
Ordernumber Size / Identifier Material group Surface Thread version Lubrication Article no. dd ToleranceABd1d2d3d6hl1l2l6l7l8sw1Static basic load rating C0 (kN)Permissible rpm*Angle of misalignment α°Bearing radial tolerance in mm min. - max.Masse (g) per Stück Shop
Rod ends DIN ISO 12240-4 (DIN 648) high performance version for higher basic load ratings with threaded bolt (mbo standard 53) male thread | 6 | galvanised | Steel

Details of the selected product

  • 10 53 6482 2006/013
  • 6
  • Steel
  • galvanised
  • via cupped-type lubricating nipple DIN 3405; regular lubrication required using non-soap high-temperature grease with a high drop point to ensure consistent lubrication at high operating temperatures; working range: -50 °C to +250 °C; initial lubrication must be performed during initial operation
  • housing: thermal treatment steel 1.7225 (42CrMo4), forged, galvanised

    bearing shell: special bronze CuSn8

    internal ring: ball bearing steel 1.3505 (100Cr6), hardened, grinded, polished, alternative: hard chrome-plated

    threaded bolt: undercut steel 1.0718 (11SMnPb30+C), galvanised

Pricing

Please first choose whether you are a private or corporate customer

The selected article is unfortunately not available in the shop at the moment. However, we would be delighted to receive a request from you!
€0.00
€0.00

In stock

Private customer (with VAT)
Corporate customer (without VAT)

This might also interest you

Clevis with male thread product image
Clevises with male thread
Angle joint DIN 71802 form CS with threaded stud product image
Angle joints DIN 71802 form CS with threaded stud
Shop

You are in the mbo shop. Please choose the article you require and activate an inquiry/order.

More about the shop
Contact

Do you have any questions or would you like to talk to us in person? We would be delighted to advise you in person!
Tel. +49 9345 6700

To the contact form