mbo Osswald understands by linking elements the standard production programme of over 12,000 different mechanical linking elements. These are kept permanently in stock and can be called at any time. Our standard programme includes:
1 Assortment boxes 
2 Folding spring bolts (for clevises)          
3 Clevises 
4 Bolts with pin hole or with groove (suitable for clevises) 
5 Clevises made of stainless steel
6 Bolts made of stainless steel with pin hole or with groove (suitable for clevises) 
7 Clevises with male thread 
8 Clevises with elongated hole 
9 Clevises with hardened cross hole
10 Mating pieces for clevises 
11 Clevis joints combinations / Joint rods
12 Bolts (to DIN 1443/DIN EN 22340/ISO 2340) with pin holes or with grooves
      Bolts (to DIN 1444/DIN EN 22341/ISO 2341) with pin hole or with groove
      Bolts (to DIN 1445) with head and spigot
13 Retainers for shafts with groove 
14 Retainers for shafts without groove  
15 Assembly tools 
16 Angle joints / Ball studs / Housings
17 Rod ends  / Pivoting bearings 
18 Knuckle eyes 
19 Cardan joints 
20 Taper keys with gip head / Tangential keys / Parallel keys / Woodruff keys / Set collars / Axle holders / Nuts for T-slots 
In addition to the standard parts in mechanical linking elements mbo Osswald produces drawing parts in accordance with customer requirements. mbo manufactures rod and shaft parts made from steel and stainless steel with diameters from 4 mm to 65 mm, up to an overall length of 650 mm. In particular cross holes, grooves, milling, multiple-edge turning and complicated geometries can be realised. The machinery from mbo Osswald is characterised by high flexibility, special repeat accuracy and short machining times. This means the economical manufacture of simple workpieces through to geometrically complex parts made from high-strength steels with closely toleranced dimensional and surface specifications.