In addition to manufacturing drawing parts mbo Osswald offers a wide range of DIN parts. These are:
Clevises DIN 71752
Clevis joints DIN 71751
Bolts DIN 1433, DIN 1434, DIN 1435, DIN 1436, DIN 1444, DIN 1444, DIN 1454, DIN 1455, DIN 1456, DIN 1457
Bolts with head and spigot DIN 1445
Locking washers according to DIN 6799
Retaining ring according to DIN 471
Angle joints DIN 71802
Ball studs according to DIN 71803
Housings to DIN 71805
Rod ends DIN 648
Pivoting bearings DIN 648
Rod ends hydraulic DIN 24338, DIN 24555
Cardan joints DIN 808
Taper keys with gip head to DIN 6887
Tangential keys to DIN 268, DIN 271
Parallel keys to DIN 6885
Woodruff keys to DIN 6888
Set collars to DIN 705
Axle holders to DIN 15058
Nuts for T-slots to DIN 508
In addition to the standard parts in mechanical linking elements mbo Osswald produces drawing parts in accordance with customer requirements. mbo manufactures rod and shaft parts made from steel and stainless steel with diameters from 4 mm to 65 mm, up to an overall length of 650 mm. In particular cross holes, grooves, milling, multiple-edge turning and complicated geometries can be realised. The machinery from mbo Osswald is characterised by high flexibility, special repeat accuracy and short machining times. This means the economical manufacture of simple workpieces through to geometrically complex parts made from high-strength steels with closely toleranced dimensional and surface specifications.