clevis mating pieces
Considerable savings can be made with mating pieces for clevises. They can, for example, be easily combined in place of a rod end (DIN 648/DIN ISO 12240-4) with a clevis (DIN 71752/DIN ISO 8140) if links are required which are to compensate offset in one direction. Compared with the rod end, which is much more expensive, there are only a few limitations. We offer our mating pieces to match the standard clevises. Material: 1.0718 (11SMnPb30+C), alternatively: stainless steel 1.4305 (X8CrNiS18-9). Surface protection: bright-oiled or at the manufacturer's discretion; alternatively phosphatised and oiled, galvanised, passivated in white-blue or yellow. Special versions: left-hand thread and other threads or special slot width and cross hole on request; we look forward to your enquiry.
Siehe auch:
passivated, stainless steel, clevis, clevises, mating pieces for clevises, rod end, oiled, thread, material, surface, surface protection, for clevises, passivated in white-blue or yellow, cross hole, standard, slot, special versions, steel, material
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
